Playground safety surfacing and outdoor surfacing systems for public spaces

Design and supply of poured-in-place (wetpour), permeable and environmental surfacing systems for playgrounds, schoolyards and outdoor spaces.
Let’s talk about your project

3.00 m

Maximum critical fall height (EN 1177) with a 120 mm system (110 + 10)

15

Calzado top-layer colours, plus custom shades from 40 m²

100%

of the granulate comes from footwear industry production offcuts

6 years

commercial warranty on impact attenuation (Calzado)

EN 1177 compliant•Fall heights up to 3.00 m•100% shoe-sole offcuts•Tyre-free•15 top-layer colours•INESCOP tested•6-year warranty•
EN 1177 compliant•Fall heights up to 3.00 m•100% shoe-sole offcuts•Tyre-free•15 top-layer colours•INESCOP tested•6-year warranty•

Calzado: the circular impact-absorbing surface, born from footwear

A granulate made entirely from shoe-sole production offcuts, for playgrounds, schoolyards and nurseries. A circular, traceable material, designed for skin contact.

100 % chutes de production

Matière pré-consommation de l'industrie européenne de la chaussure, sans résidus routiers. Sol recyclable en fin d'usage.

Analysée pour le contact humain

Analyses toxicologiques INESCOP : teneur en HAP au moins vingt fois sous le seuil européen, et aucune odeur de pneu.

Moins de matière

6 kg/m² en finition au lieu de 10. Hauteurs de chute de 0,80 m à 3,00 m, selon la NF EN 1177.

Shoe sole releasing PCE Calzado colored granules

Illustrative image

Shoe sole releasing colored granulesPile of multicolored shoe sole scrapsCalzado calibrated granules being poured in a cascadeGranules being mixed with a red-colored binder in a mixerInstaller smoothing out poured-in-place safety surfacingPlayground with poured-in-place safety surfacing

From sole to surface

01 / 06

A sole that was never worn

It all starts with production offcuts from the European footwear industry: new, pre-consumer material.

02 / 06

Offcuts recovered

Sole trimmings and rejects are collected from our European supply-chain partners. No tyre or road residue.

03 / 06

A graded granulate

Ground, then graded: 3–7 mm for the base layer, 1–3 mm for the top layer.

04 / 06

An encapsulated top layer

Multiple encapsulation gives the top-layer granulate its colour: 15 colours, plus custom shades from 40 m².

05 / 06

Poured in place

A qualified installer lays the base layer, then a seamless 10 mm top layer.

06 / 06

A circular impact-absorbing surface

Critical fall heights up to 3.00 m under EN 1177, a 6-year warranty on impact attenuation, and recyclable at end of life.

The system in cross-section

120 mm of Calzado, 3.00 m critical fall height

On a concrete base, under EN 1177. Thickness is sized to the fall height, from 20 to 120 mm. Indicative values, adjusted by the installer.

SupportBéton, enrobé ou GNTPrimaire d’accrochage0,250 kg/m²Sous-couche Calzado 3/7 mmJusqu’à 110 mm · 100 % chutes de semellesFinition Calzado 1/3 mm10 mm · encapsulation multiple · 15 coloris

Calzado top layer 1–3 mm

10 mm · multiple encapsulation · 15 colours

Calzado base layer 3–7 mm

Up to 110 mm · 100% shoe-sole offcuts

Bonding primer

0.250 kg/m²

Base

Concrete, asphalt or compacted aggregate

Simulateur

Quelle épaisseur pour votre hauteur de chute ?

0,80 m3,00 m
60 mmépaisseur totale de Calzado conseillée
50 mmsous-couche Calzado 3/7 mm
10 mmfinition Calzado 1/3 mm

Cette épaisseur couvre jusqu’à 1,80 m de hauteur de chute. Valeurs indicatives sur support béton, selon la NF EN 1177 : l’applicateur ajuste l’épaisseur selon le support et l’essai de réception.

Demander une étude pour mon projet

Calzado in 2 minutes

From a never-worn shoe sole to your local playground: the Calzado supply chain and its 5 levers for a more affordable impact-absorbing surface. Video in French.

Our method, from design to site

Terraludis Systems is involved from the design stage, then supplies the materials and handles logistics, working directly with installation contractors.

1

Design and specification

Technical support from the design stage: uses, standards (EN 1176 / EN 1177, HIC), base, specifications and quantities.

2

Choosing the system

EPDM, ECP, Calzado or natural cork, sized to the fall height, the base and the budget, with no dependence on a single solution.

3

Supply and logistics

Granulates, binders and components delivered to site or warehouse, with phased supplies and kits for small and medium areas.

4

Installation by a qualified contractor

Your installer lays the system following our installation protocol and data sheets, with acceptance testing and remote technical support from our team (phone and video call).

Our commitments

What you can count on

A playground surface commits a public authority for many years. With 20 years of experience in impact-absorbing surfacing, this is what Terraludis guarantees on every project.

01

Technical support from the design stage

EN 1176 and EN 1177, fall heights, base, quantities and specification writing: we work with the specifier before the tender.

02

A traceable, tested material

Granulate made from shoe-sole production offcuts, with no tyre or road residue. INESCOP tests: PAHs at least twenty times below the EU limit.

03

A 6-year warranty on impact attenuation

Commercial warranty on the impact attenuation of Calzado, subject to regular maintenance and compliance with the installation protocol.

04

Reliable supply

Granulates, binders and components delivered to site or warehouse, phased supplies and kits for small and medium areas.

Our outdoor surfacing solutions

A porous concrete tennis court to renovate? Read our guide: the 3 options →

Project designer, design office or public authority? Our specification support: technical specifications, HIC, quantities →

A playground in a natural material, with no tyre rubber or pigments? Discover cork impact-absorbing surfacing →

Preparing a budget? Cost per m² of impact-absorbing surfacing and maintenance cost over 10 years (article in French) →

Un projet à dimensionner ? Composez votre sol dans le configurateur : épaisseur, quantités et texte de CCTP en quatre étapes.

Each Terraludis solution is designed as a complete system, covering the base, the technical layers and the materials, to ensure performance, durability and regulatory compliance.
Terraludis Systems designs EPDM playground safety surfacing, slip-resistant pool surround coatings and technical surfacing systems for public spaces.

Download technical data sheets

Calzado play features

15 top-layer colours

Create your Calzado shade

Mix the encapsulated granulates in the range: 12 ready-made blends or your own proportions, with an instant preview and quantities calculated for your area. Custom shades available from 40 m².

Open the colour blender →

Real projects

Playgrounds, nursery yards and sports areas built by our installer customers with materials supplied by Terraludis. Photos supplied by our customers or taken during site visits.

Blue impact-absorbing flooring with flower and sun patterns around a slide

Patterned surface around a slide

Blue cushioned flooring with marine patterns, fish and starfish, under a nursery pergola

Marine patterns under a pergola

Urban playground with green and sand-colored poured-in-place safety surfacing

City-centre playground

Daycare playground with sand-cushioned flooring and red flowers on a black underlay

Nursery playground

Daycare playground with orange impact-absorbing flooring and a large purple flower

Nursery yard

Applicators smoothing a green shock-absorbing surface on a multi-sport court

Installation on a multisport court

Frequently asked questions

Preparing your specification

Thickness, material, colours, warranties and installation: answers to the questions specifiers and public authorities ask.

Quelle épaisseur prévoir selon la hauteur de chute ?

Sur support béton, avec 10 mm de finition : 20 mm couvrent 0,80 m, 40 mm 1,30 m, 60 mm 1,80 m, 80 mm 2,40 m et 120 mm 3,00 m de hauteur de chute, selon la NF EN 1177. Ces valeurs sont indicatives : l’applicateur ajuste l’épaisseur selon le support et l’essai de réception. Essayer le simulateur

Le Calzado contient-il du pneu recyclé ?

Non. La sous-couche est issue à 100 % de chutes de production de semelles de chaussures, une matière pré-consommation sans résidus routiers, et le granulat de finition est encapsulé. Les analyses INESCOP mesurent une teneur en HAP au moins vingt fois inférieure au seuil européen, sans odeur de pneu.

Quelle différence avec un sol EPDM ?

Le rendu fini est le même : un sol coulé en place, continu et sans joint. Le Calzado demande moins de matière en finition (6 kg/m² au lieu de 10) et se pose plus vite, ce qui allège le budget du chantier.

Combien de coloris sont disponibles ?

15 coloris de finition, à poser seuls ou en mélange, et des teintes sur mesure à partir de 40 m². Les teintes les plus vives sont formulées avec une résine aliphatique pour mieux résister aux UV. Composer un mélange

Quelles sont les garanties ?

6 ans sur le pouvoir amortissant et 5 ans sur la cohésion, sous réserve d’un entretien régulier et du respect du protocole de pose. Voir la fiche Garanties

Qui réalise la pose ?

Terraludis conçoit et fournit le système. La pose est réalisée par une entreprise applicatrice qualifiée de votre secteur, avec protocole de pose, fiches techniques et essai de réception. Nous pouvons vous orienter vers un applicateur partenaire. Nous contacter

Quand l’aire de jeux peut-elle rouvrir ?

Comptez environ 8 h de séchage en surface et 24 h à cœur avant la remise en service. L’applicateur précise le délai selon la météo du chantier.

Que devient le sol en fin de vie ?

Il ne finit pas en décharge. Le jour où l’aire est renouvelée, l’ancien sol Calzado est déposé, broyé sur le chantier et réincorporé à 30 à 50 % dans la sous-couche du nouveau sol : pas de camion de déchets, la matière reste sur place. Service en préparation, essais HIC en cours. Voir la boucle Calzado

Working on an outdoor surfacing project, at design stage or already specified?

Let’s talk about your project