Installer applying binder and encapsulated Calzado granules on an outdoor playground

Technical article

Installing Calzado: Report from a Site

Report on installing a poured-in-place Calzado surface: substrate preparation, pouring, top layer and acceptance testing.

A circular granulate designed for installation

Calzado is a granulate made 100% from production offcuts from the European footwear industry. Combined with a polyurethane binder, it is poured in place to form a seamless, free-draining, impact-absorbing surface.

  • For the client: a circular, traceable material, with INESCOP toxicological analyses below European limits.
  • For the installer: a homogeneous granulate, free from textile fibres and metal particles, to be combined with an aromatic or aliphatic binder depending on the colour. Less material to lay: 6 kg/m² in the top layer instead of 10.

Site report: from preparation to top layer

A successful poured-in-place safety surface depends on control of the complete system, from substrate to top layer.

Step 1: substrate preparation

A suitable substrate (concrete, asphalt or compacted sub-base), with flatness and bearing capacity checked and falls and drainage managed, then a primer suited to the substrate before any pouring.

Step 2: pouring the base layer and top layer

The Calzado base layer is laid at 4 kg per centimetre of thickness per square metre, with 12% binder. The encapsulated top layer is then trowelled at 6 kg/m², with 22% binder. Ratios are adjusted on site by the installer according to the substrate, temperature and humidity.

Step 3: the finished result

Poured-in-place safety surface with colourful geometric patterns in a playground
Poured-in-place safety surface with geometric patterns and bright colours in a modern playground.

The result is a seamless, colourful surface sized for the fall height to be covered, in line with EN 1177. Compliance is checked by an acceptance test on the finished surface (HIC and gmax), carried out by the installer.

Why choose Terraludis for your material systems?

Terraludis is a materials supplier and a partner to installers.

  • Specification advice: we help buyers define the right thickness for their fall height, from 0.80 m to 3.00 m (see our Calzado article).
  • Installer support: technical data sheets, an installation protocol and technical backing, provided remotely for projects outside France.
  • Reliable logistics: granules, binders and primers delivered to match the project phasing.

More projects are shown in our project references.

A playground or schoolyard to renovate? Contact Terraludis for our technical data sheets or a materials quote.

Planning a surfacing project?
We support public authorities, specifiers and contractors in designing surfacing systems that meet the relevant standards and technical requirements.
Request a technical study