
Technical article
Tyre-free rubber playground surfacing made 100% from shoe-sole offcuts: a circular, poured-in-place system for fall heights from 0.80 m to 3.00 m.
Four steps, from production offcut to finished surface on site.
1Shoe-sole offcuts: identified European industrial streams.
2Graded granulate: homogeneous material, free from textile fibres and metal particles.
3Encapsulation: the colour is bonded in several coats, with UV protection.
4Poured-in-place surface: playgrounds and sports areas.
Illustrative images.
For decades, the poured-in-place impact-absorbing surfacing market has relied on two families of material: SBR from recycled tyres, and virgin synthetic EPDM. Calzado offers a third, circular route.
Calzado is a granulate made 100% from production offcuts from the European footwear industry: no virgin material is extracted to make the granulate. The name refers to the origin and grade of the material, not to a chemical family.
One point is worth stating clearly, because it is often misunderstood: the base polymer in Calzado belongs to the same family as that of an SBR tyre granulate. What differs is not the chemistry, but the formulation and the history of the material.
A tyre is formulated to run on the road. It contains carbon black and process oils, and it picks up road residues throughout its service life. A shoe sole is formulated to be worn close to the skin, to the specifications of the footwear industry, and has never been used.
Calzado does not come from the collection of used, end-of-life products. It is made from cutting offcuts, recovered rather than disposed of, from identified European industrial streams.
Identified streams. Recent production, exclusively European, processed by an approved operator audited on site.
Batch-to-batch consistency. Formulations are governed by footwear-industry specifications, which gives a physical and mechanical consistency that mixed post-consumer collection streams cannot match.
A clean material. Homogeneous material, free from textile fibres and metal particles.
A circular end of life. At the end of its service life, the surface can be collected, shredded and fed back into the manufacture of technical surfaces or impact-absorbing base layers, with no landfill.
The identity of the production sites and the factory certificates are available on request, under a non-disclosure agreement.
The two-layer system combines an impact-absorbing base layer in 3–7 mm granules with a 10 mm colour-encapsulated top layer in 1–3 mm granules.
Critical fall height by total system thickness
Indicative values based on laboratory tests to EN 1177 on a concrete slab; values are higher on compacted aggregate or asphalt. Total thicknesses, including the 10 mm top layer. Every installation is different: thickness, binder ratios and application temperature are adapted to the site by the installer, who is responsible for the on-site acceptance test required by the standard.
What it means for material consumption. The Calzado base layer is applied at 4 kg per centimetre of thickness per square metre, and the top layer at 6 kg per square metre, compared with 10 kg for an EPDM top layer. Less material to order, deliver and lay: a lighter job for installation crews.
The granulate has undergone toxicological analysis by INESCOP, the European technology centre for the footwear industry — report no. C-24041693.
Six families of substances were tested: phthalates, organotin compounds, polycyclic aromatic hydrocarbons (PAHs), short-chain chlorinated paraffins, heavy metals and dimethyl fumarate. All results are below EU regulatory limits, most of them below the detection limit.
One result deserves to be singled out. The measured PAH content is at least twenty times below the 20 mg/kg limit set under Annex XVII of REACH (Regulation (EU) 2021/1199), when the EU tightened PAH limits for rubber granules used as synthetic-turf infill or in loose form on playgrounds.
On top of this comes a practical criterion that is often decisive in nurseries, schools and enclosed spaces: no sulphur emissions and no tyre smell.
Full analysis results are given in the Safety & Traceability sheet, available for download.
Calzado granulate is multicoloured. The top-layer colour is achieved by multiple encapsulation, with UV protection on every colour. The standard range includes 15 colours; any other colour can be made to order from 40 m² of top layer.
Commercial warranty on the material supplied, without prejudice to statutory warranties: 6 years on impact attenuation, 5 years on granule cohesion and 5 years on colour fastness, subject to compliance with the installation protocol and documented maintenance. Full details are given in the Warranty sheet.
Recent projects, laid by our partner installers in France using Terraludis materials.

Cour de crèche · Fréjus (83) · novembre 2026

Schoolyard · Cannes, France · October 2026

Schoolyard · Cannes La Bocca, France · October 2026

Playground · Cannes, France · October 2026

Playground · Montélimar, France · 2026

Nursery playground · Hauts-de-Seine, Paris region

Nursery playground · Hauts-de-Seine, Paris region · pergola area

Base layer under street workout equipment · Brest, Brittany · 2026

Multi-sport court · Gard, France · March 2026
All our project references are on the Resources page.
Calzado can be used in several configurations, depending on the project.
Calzado base layer with encapsulated Calzado top layer — material consistency across the whole build-up and a strong environmental profile.
Calzado base layer with EPDM top layer — for projects where the client specifies the EPDM colour range.
Zoned systems — a standard top layer across the whole surface, with reinforced treatment in high-wear zones: slide run-outs, under swings, zip-line landings. On a playground, most of the abrasion is concentrated on just a few square metres. To repair a worn area locally, Calzado repair kits are available in all 15 colours.
To compare Calzado with EPDM, ECP and cork, see our page on playground impact-absorbing surfacing.
For specifiers and design consultants — a documented alternative, European traceability, a granulate made 100% from production offcuts, and an analysis file you can use in public tenders with environmental requirements.
For installers — less material to order and mix, a written installation protocol, and technical data sheets for each component.
For operators — a seamless, permeable surface with no standing water or mud, and a material that can be collected and shredded at the end of its service life.
Work with your own installer: we supply the system, the data sheets and the installation protocol, with remote technical support from our team by phone or video call — sizing, quantities and installation method. Quotes and installation remain the installer's responsibility.
The brochure and technical sheets can be downloaded from our Resources page.
contact@terraludis.com · +33 6 70 67 74 43