Blue and green poured-in-place safety surfacing with flower patterns, around a slide

Luxembourg · municipalities · public contracting authorities

Playground safety surfacing in Luxembourg: Calzado, a circular and traceable material

Calzado is a poured-in-place surface whose granulate comes from production offcuts of new shoe soles, with no recycled tyres. Terraludis provides the complete system, its technical data sheets and its installation protocol; the installer of your choice carries out the installation.

EN 1177critical fall height, verifiable by HIC test
≈ 6 kg/m²for a 10 mm top layer (≈ 10 kg/m² in EPDM)
3.00 mfall height covered with 120 mm in total
15standard colours, custom shade from 40 m²

Calzado: a poured-in-place surface with no recycled tyres

Offcuts of new shoe soles

The granulate comes from production offcuts from the European footwear industry: a pre-consumer material, never worn. The system contains no tyre granulate.

A lighter surface

About 6 kg/m² for a 10 mm top layer, whereas an EPDM top layer needs about 10 kg/m². The base layer (3/7 mm) is made from 100% shoe-sole offcuts; the top layer (1/3 mm) is protected by multiple encapsulation.

Colours and test results

A range of 15 top-layer colours and custom shades from 40 m². The file includes the INESCOP test results (report C-24041693, all compliant) and safety note TL-ENV-2026-V2.

Installation: bonding primer at 0.250 kg/m², curing time of 8 h surface-dry and 24 h fully cured. Warranties: 6 years on impact attenuation and 5 years on cohesion, subject to regular maintenance and compliance with the installation protocol.

Public procurement in Luxembourg: sustainability, circularity and traceability

Public procurement in Luxembourg increasingly includes sustainability and circularity criteria. For a municipality (commune) or a public contracting authority (maître d’ouvrage public), a playground surface is therefore also chosen on the origin of its material and the quality of its documentation.

Municipalities and public contracting authorities

  • Public purchasing that favours sustainable and circular materials
  • Environmental criteria to be set out in the specifications (cahier des charges)
  • A safety surface whose material origin is known
  • A complete technical file for evaluating tenders

A circular, traceable material

  • Pre-consumer material from the European footwear industry
  • Reuse of production offcuts from new shoe soles
  • Base layer made from 100% shoe-sole offcuts
  • Origin backed by the technical data sheets and INESCOP test results

Rubber granulate: the PAH question

  • The EU has tightened the PAH limits for rubber granules used as infill on artificial pitches or in loose form on playgrounds (REACH Regulation (EU) 2021/1199)
  • Contracting authorities expect greater transparency about what surfaces are made of
  • Calzado contains no recycled tyres and its test results are documented

In the specifications, Calzado is described as a complete system: bonding primer, base layer, top layer and total thickness set according to the fall height of the equipment (EN 1177). The contracting authority has the technical data sheets, the INESCOP test results and the safety note to assess its file.

Poured surfaces made with tyre granulate are still in use; Calzado is not intended to disqualify them. It adds an option to the municipality’s choice whose origin and test results are known, to be compared on the documents.

View the technical data sheets
Our components (binders, granulates, resin-bound stone carpet) are available for direct purchase in store for professionals and discerning private customers.

Critical fall height and Calzado thickness (EN 1177)

Each piece of playground equipment has a free fall height, and the total thickness of the surface is chosen accordingly. The table gives indicative values for Calzado poured on a concrete base, including a 10 mm top layer:
Total floor thickness (including 10 mm finish)Critical fall height (indicative value)
20 mm0.80 m
40 mm1.30 m
50 mm1.60 m
60 mm1.80 m
70 mm2.10 m
80 mm2.40 m
90 mm2.60 m
100 mm2.70 m
120 mm3.00 m
These values come from system tests and are for guidance only. An HIC test is recommended once the surface is installed; the installer adjusts the thickness to the actual base.

How we work from France for Luxembourg

Installation is entrusted to your own installer. On our side, we supply the Calzado system materials, the technical data sheets and the installation protocol, and we provide remote technical support by phone or video call.

1

You tell us about the project

Area to be covered, play equipment and its fall heights, type of base and a few photos of the playground.

2

We quote and supply the system

Thicknesses calculated to EN 1177, quantities, materials, technical data sheets and installation protocol.

3

Your installer carries out the installation

The work is carried out by the installer you have chosen; they can contact us remotely, by phone or video call, with any technical question.

Delivery arrangements and lead time confirmed with the quote. Contact: contact@terraludis.com – +33 6 70 67 74 43.

Frequently asked questions – playground safety surfacing in Luxembourg

Le maître d’ouvrage ou son bureau d’études le décrit comme un système complet : primaire d’accrochage (0,250 kg/m²), sous-couche, finition de 10 mm et épaisseur totale dimensionnée selon la hauteur de chute des équipements (EN 1177). Nous transmettons les fiches techniques, les analyses INESCOP (rapport C-24041693, toutes conformes) et la note de sécurité TL-ENV-2026-V2, qui permettent de documenter les critères de durabilité du marché.
Son granulat provient de chutes de production de semelles de chaussures neuves, issues de l’industrie européenne de la chaussure : c’est une matière pré-consommation, sans pneu recyclé. La sous-couche est composée à 100 % de ces chutes et la finition est encapsulée. L’origine de la matière et les résultats d’analyse sont documentés, ce qui aide le maître d’ouvrage à justifier son choix.
Non. Vous travaillez avec l’applicateur de votre choix. Terraludis fournit le système (matériaux), les fiches techniques et le protocole de pose, et répond à ses questions techniques à distance, par téléphone ou en visio. Nous ne nous déplaçons pas sur le chantier.
La surface de l’aire de jeux, la liste des équipements avec leurs hauteurs de chute, la nature du support et, si possible, quelques photos. Les modalités de livraison et le délai sont précisés avec le devis. Écrivez-nous via la page contact ou appelez le +33 6 70 67 74 43.
Planning a surfacing project?
We support public authorities, specifiers and contractors in designing surfacing systems that meet the relevant standards and technical requirements.
Request a technical study