
Aliphatic PU resin · Natural aggregates
TL-Stone2800 aliphatic resin binds natural aggregates into a non-yellowing, permeable surface for paths, terraces, public squares, pool decks, and driveways.
For illustrative purposes only.
Stone carpet combines mineral aggregates with a polyurethane resin. Water passes through the surface, limiting runoff and facilitating rainwater management.

Water passes through the surface: no puddles, no runoff. Dune blend. Illustrative image.
Water infiltrates through the surface, which reduces puddles and runoff.
The resin is transparent, keeping the colour and texture of the aggregates visible. You are free to choose any aggregate.
Suitable for all types of use, both outdoors and indoors: pedestrian paths, terraces, public squares, tree surrounds, and pool decks.
A single-resin, two-component aliphatic polyurethane: it does not yellow under UV exposure and preserves the colour of all aggregates, whether for pedestrian or vehicular use.
For all aggregates, light or dark, indoors or outdoors: the resin does not yellow and does not alter their colour.
The resin dosage is expressed as a percentage of the aggregate weight. It is specified in the technical data sheet for each resin.
100% aliphatic, polyaspartic-modified, 100% solids two-component polyurethane binder. The polyaspartic modification increases surface hardness and resistance to heavy foot traffic and light vehicles.
System, aggregates, blends, and projects, in 4 pages.
Download →Substrate, thickness, dosage, batches, joints, and profiles.
Download →Characteristics, mixing, curing, and substrate.
Download →Application, storage, and safety.
Download →12 shades of washed, dried, and semi-rounded aggregates and 8 ready-to-mix blends, bonded with TL-Stone2800. For vehicle-accessible areas, our blends are quartz-based.

Pedestrian: contemporary terraces

Pedestrian: dark architecture

High-traffic pedestrian: granite look

Pool surrounds, gardens

Mediterranean style

Pool decks

Driveway-grade: paths and parking areas

Driveable: cooler version
Terraludis supplies the resin and, upon request, the aggregates. The installation company handles the application.
A clean, stable, and suitable substrate, with a bonding primer if necessary.
The aggregates and resin are mixed according to the dosage specified in the technical data sheet.
The mixture is applied and then smoothed with a trowel.
Observe the waiting time before putting the surface into service.
For parking light vehicles, the stone carpet recipe changes: 25 to 30 mm with our TL-Stone2800 resin, approximately 7% resin, hard aggregates, and a base designed for vehicle traffic. Standard thin applications are reserved for pedestrian use only.

Before / after: cracked concrete slab renovated with a 25 mm Golden Quartz mix. Illustrative visual.
Recommended thicknesses for our TL-Stone2800 resin. These remain the same for both flat and sloped surfaces.
Under a turning tyre, soft grains wear down, become polished and slippery when wet, and eventually loosen.
Too little resin and the grains will tear out; too much and it settles at the bottom, causing the carpet to lose its porosity.
Indicative values for resin-bound systems suitable for vehicle traffic. The resin technical data sheet takes precedence.
Aggregates and resin: the complete system
12 shades of washed and dried aggregates, 8 ready-to-mix blends, including 2 for vehicle traffic, and TL-Stone2800 resin.
View aggregates and blends