Prefabricated modules · playgrounds

Calzado playground modules

Half-spheres, spheres, steps, seating, tables, marble runs, 3D animals, and 2D designs in Calzado or EPDM. Calzado offers the same look for a significantly lower budget. Ready to install, custom-made, or in stock.

163D animal figures
20themed 2D figures
Custom-madedimensions and colours
In stockin standard colours
Cylindrical Calzado seating in various colors, composition

The range

Prefabricated modules available in standard or custom sizes, cast in Calzado or EPDM.

Orange EPDM half-sphere for playgrounds

Half-sphere

Ref. TL-3D-DSP-030 to 080 · ≈ 6 to 50 kg

Ø 30 to 80 cm — H = Ø/2

View technical specifications →

Solid dome for climbing or defining a space. Choice of colours.

EPDM sphere on base for playgrounds

Sphere

Ref. TL-3D-SPH-030 to 080 · ≈ 12 to 105 kg

Ø 30 to 80 cm on base

View technical specifications →

Full sphere on a base — a balance marker or decorative piece.

EPDM 3-step staircase for playgrounds

Step

Ref. TL-3D-STP-020 / 040 / 060 · W 60 cm, H 20 / 40 / 60 cm · ≈ 50 to 150 kg

View technical specifications →

Steps or platforms for climbing, jumping, or sitting — height and length customisable.

EPDM cylindrical seats for playgrounds

Seats

Ref. TL-3D-ASS-030 / 050 / 090 · ≈ 16 to 65 kg

Ø 30 to 50 cm — H 20 to 40 cm

View technical specifications →

Solid cylinders that can be used as seats, low tables, or obstacle course elements.

EPDM round table with EPDM cylindrical seats for playgrounds

Table

Ref. TL-3D-TAB-R

View technical specifications →

Custom dimensions

Round table with a central pedestal, designed to be paired with cylindrical seats. Choice of colours.

EPDM spiral marble game

Marble game

Custom dimensions

Raised marble game board: spirals, paths, and target holes. Choice of colours.

Raised EPDM marble run with tunnel and loop

Marble run

Custom dimensions

Raised marble run with tunnels, loops, and turns. Can be installed on the ground or on a platform.

Calzado or EPDM 3D animals for playgrounds

3D animals assembled from our modules: spheres, semi-spheres, cylindrical seats, and small shapes (cones, discs, cylinders). Available in Calzado, our most economical solution, or in EPDM. Custom colours and adaptable dimensions. Dimensions are indicative (L × W × H).

3D EPDM ladybug animal for playgrounds

Ladybird

Ref. TL-3D-ANI-COC · ≈ 120 kg

View technical specifications →

L 95 × W 80 × H 80 cm

80 cm diameter spherical body, 30 cm diameter semi-spherical head, inlaid black spots.

3D EPDM crab for playgrounds

Crab

Ref. TL-3D-ANI-CRA · ≈ 55 kg

View technical specifications →

L 100 × W 120 × H 65 cm

Ø 70 cm hemisphere, spherical eyes on stems, Ø 30 cm hemisphere claws, cylindrical legs.

3D EPDM snail for playground

Snail

Ref. TL-3D-ANI-ESC · ≈ 75 kg

See technical data sheet →

L 115 × W 60 × H 75 cm

Spherical shell Ø 60 cm with inlaid spiral, body made of three half-spheres Ø 30 cm, spherical head Ø 25 cm.

3D EPDM hedgehog for playground

Hedgehog

Ref. TL-3D-ANI-HER · ≈ 65 kg

See technical data sheet →

L 105 × W 85 × H 55 cm

Half-sphere Ø 80 cm, 15 cm cone-shaped spines, conical snout.

3D EPDM frog for playground

Frog

Ref. TL-3D-ANI-GRE · ≈ 60 kg

See technical data sheet →

L 100 × W 110 × H 55 cm

Half-sphere Ø 80 cm, spherical eyes Ø 20 cm, disc-shaped legs.

3D EPDM turtle for playground

Turtle

Ref. TL-3D-ANI-TOR · ≈ 65 kg

See technical data sheet →

L 115 × W 90 × H 40 cm

Half-sphere shell Ø 80 cm with inlaid hexagons, head Ø 25 cm, cylindrical legs.

3D EPDM chick for playground

Chick

Ref. TL-3D-ANI-POU · ≈ 75 kg

See technical data sheet →

L 65 × W 70 × H 90 cm

Spherical body 60 cm in diameter, spherical head 35 cm in diameter, conical beak, disc-shaped wings.

3D EPDM penguin for playgrounds

Penguin

Ref. TL-3D-ANI-PIN · ≈ 60 kg

See technical data sheet →

L 65 × W 50 × H 65 cm

Cylindrical seat body 50 cm diameter × 40 cm high, 50 cm diameter hemispherical head, orange beak and feet.

3D EPDM pig for playgrounds

Pig

Ref. TL-3D-ANI-CCH · ≈ 90 kg

See technical data sheet →

L 80 × W 70 × H 85 cm

Spherical body 70 cm in diameter on four cylindrical legs, cylindrical snout, triangular ears.

3D EPDM whale for playgrounds

Whale

Ref. TL-3D-ANI-BAL · ≈ 60 kg

See technical data sheet →

L 120 × W 80 × H 55 cm

80 cm diameter hemisphere with inlaid band, flat tail, conical blowhole.

3D EPDM sheep for playgrounds

Sheep

Ref. TL-3D-ANI-MOU · ≈ 105 kg

See technical data sheet →

L 100 × W 80 × H 70 cm

Hemisphere Ø 80 cm covered in woolly bumps, black head, cylindrical legs.

3D EPDM Bee for playgrounds

Bee

Ref. TL-3D-ANI-ABE · ≈ 90 kg

See technical data sheet →

L 85 × W 70 × H 85 cm

Body is a Ø 70 cm sphere with inlaid stripes, hemispherical head Ø 30 cm, disc-shaped wings.

Modular EPDM snake seating for playgrounds

Modular snake

Ref. TL-3D-ANI-SER · ≈ 130 kg

See technical data sheet →

L 240 × W 90 × H 40 cm

Cylindrical seats Ø 40 cm, ranging from 20 to 40 cm in height, arranged in an S-shape, with a hemispherical head Ø 40 cm. Length depends on the number of seats.

3D EPDM Caterpillar for playgrounds

Caterpillar

Ref. TL-3D-ANI-CHE · ≈ 155 kg

See technical data sheet →

L 200 × W 50 × H 60 cm

Five spheres from Ø 50 to 30 cm, red head with antennae.

3D EPDM Teddy Bear for playgrounds

Bear cub

Ref. TL-3D-ANI-OUR · ≈ 145 kg

See technical data sheet →

L 90 × W 80 × H 125 cm

Body sphere Ø 80 cm, head sphere Ø 50 cm, with attached ears and snout.

2D figures, numbers, and hopscotch

Flat motifs flush-mounted in poured surfacing, in Calzado or EPDM: animals, space, transport, numbers, floor games, and hopscotch. Simple shapes, with no raised edges or sharp corners. Other floor games available on request: maze, target, race track, alphabet.

2D EPDM fish ground inlay for playgrounds

Fish

Sea theme · up to 1.0 × 1.2 m

Flush-mounted ground inlay, 3 colours.

2D EPDM turtle ground inlay for playgrounds

Turtle

Sea theme · up to 1.0 × 1.2 m

Flush-mounted ground inlay, 3 colours.

2D EPDM octopus ground inlay for playgrounds

Octopus

Sea theme · up to 1.0 × 1.2 m

Flush-mounted ground inlay, 3 colours.

2D EPDM fox ground inlay for playgrounds

Fox

Forest theme · up to 1.0 × 1.2 m

Flush-mounted ground inlay, 3 colours.

2D EPDM owl ground inlay for playgrounds

Owl

Forest theme · up to 1.0 × 1.2 m

Figure inlaid flush with the ground, 3 colours.

2D EPDM mushroom playground floor graphic

Mushroom

Forest theme · up to 1.0 × 1.2 m

Figure inlaid flush with the ground, 3 colours.

2D EPDM lion playground floor graphic

Lion

Savanna theme · up to 1.0 × 1.2 m

Figure inlaid flush with the ground, 3 colours.

2D EPDM giraffe playground floor graphic

Giraffe

Savanna theme · up to 1.0 × 1.2 m

Figure inlaid flush with the ground, 3 colours.

2D EPDM elephant playground floor graphic

Elephant

Savanna theme · up to 1.0 × 1.2 m

Figure inlaid flush with the ground, 3 colours.

2D EPDM zebra playground floor graphic

Zebra

Savanna theme · up to 1.0 × 1.2 m

Figure inlaid flush with the ground, 3 colours.

2D EPDM cow playground floor graphic

Cow

Farm Theme · up to 1.0 × 1.2 m

Figure inlaid flush with the ground, 3 colours.

2D EPDM rubber playground floor graphic: Hen

Hen

Farm Theme · up to 1.0 × 1.2 m

Figure inlaid flush with the ground, 3 colours.

2D EPDM rubber playground floor graphic: Ladybug

Ladybird

Garden Theme · up to 1.0 × 1.2 m

Figure inlaid flush with the ground, 3 colours.

2D EPDM rubber playground floor graphic: Bee

Bee

Garden Theme · up to 1.0 × 1.2 m

Figure inlaid flush with the ground, 3 colours.

2D EPDM rubber playground floor graphic: Butterfly

Butterfly

Garden Theme · up to 1.0 × 1.2 m

Figure inlaid flush with the ground, 3 colours.

2D EPDM rubber playground floor graphic: Astronaut

Astronaut

Space Theme · up to 1.0 × 1.2 m

Figure inlaid flush with the ground, 3 colours.

2D EPDM rubber playground floor graphic: Planet

Planet

Space Theme · up to 1.0 × 1.2 m

Figure inlaid flush with the ground, 3 colours.

2D EPDM rubber playground floor graphic: Alien

Alien

Space Theme · up to 1.0 × 1.2 m

Figure inlaid flush with the ground, 3 colours.

2D EPDM rubber playground floor graphic: Diplodocus

Diplodocus

Dinosaur Theme · up to 1.0 × 1.2 m

Figure inlaid flush with the ground, 3 colours.

2D EPDM train figure on the ground for playgrounds

Train

Transport theme · up to 1.0 × 1.2 m

Figure inlaid flush with the ground, 3 colours.

EPDM number 7 with counting discs on the ground

Numbers 0 to 9

Up to 1.0 × 1.2 m

Giant number and counting discs, for learning through play.

Escargot de course : spirale bicolore à cases numérotées incrustée dans un sol coulé

Racing snail

Approx. Ø 2.5 m · 2 colours

Two-tone numbered spiral, to be followed to the centre.

Grille de couleurs : 16 pastilles en 4 × 4 incrustées dans un sol coulé

Colour grid

Approx. 2 × 2 m · 4 colours

16 discs Ø 30 cm in a 4 × 4 grid, for balance and instruction games.

EPDM classic hopscotch inlaid in the ground for playgrounds

Classic hopscotch

Approx. 1.2 × 3.5 m

Squares 1 to 8 and a semi-circular finish.

EPDM rocket hopscotch inlaid in the ground for playgrounds

Rocket hopscotch

Approx. 1.2 × 3.5 m

Squares 1 to 10 in a rocket shape.

EPDM lily pad hopscotch inlaid in the ground for playgrounds

Lily pad hopscotch

Approx. 1.2 × 3.5 m

Ten lily pads on a river.

Custom manufacturing

  • Terraludis logo integrated into the surfacing via stencil
  • Stock available in standard colours
  • Anchoring via threaded rod onto an existing slab or structure
  • Material identical to the surfacing for seamless integration
Terraludis logo in Calzado granulate via stencilCalzado seat anchoring via threaded rodCalzado cylindrical seat with cork finish

Documentation & pricing

Download our product sheets. The full catalogue and price list are available upon request.

Have a project in mind?

Contact us to discuss your requirements: dimensions, colours, quantities, and installation methods.

Contact us