TL-3D-ANI-CHE

Caterpillar

3D animal assembled from Calzado basic shapes.

Caterpillar

Specifications

Reference

TL-3D-ANI-CHE

Dimensions

L × W × H: 2000 × 500 × 600 mm

Approximate weight

≈ 

155

 kg

Material

Calzado granulate (circular elastomer from pre-consumer shoe-sole offcuts, European supply chain), PU-bound; EPDM version available

Construction

Spheres, half-spheres and parts joined with threaded rods; eyes, spots and stripes inlaid flush, with no raised edges

Colours

Any colour from the Calzado range, single or multicoloured

Anchoring

Base plate and threaded rod set into the base layer, included

Free height of fall

0.60 m

Recommended safety surfacing

Calzado 20 mm (free height of fall ≤ 0.8 m)

Maintenance

Wash with water, no solvents

Manufacture

Terraludis workshop, made in France

Specification text

3D animal “caterpillar”, L × W × H 2000 × 500 × 600 mm, modules moulded in recycled rubber granulate made from shoe-sole offcuts (Calzado), mechanically assembled with threaded rods, flush inlays, choice of colours, anchored to the ground with a base plate and threaded rod. Terraludis reference TL-3D-ANI-CHE or equivalent. Weight ≈ 155 kg.

Caterpillar made from Calzado modules assembled in our workshop, with hand-made inlays. Any colours.

A project with this module?

Tell us the dimensions, colours, quantities and installation: we reply within 24 to 48 h. In France, we can recommend a partner installer; elsewhere, we support your own installer remotely.

Contact us